
ABOUT THIS MANUAL Protocol 3 Controller Owner’s Manual
10 Version 1.2
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
Optional decimal place can be displayed up to 999.9°C/F
Thermocouple
Calibration:
±0.1% of full range, ±1LSD (±1°C for internal CJC if enabled).
Linearization better than better ±0.2°C (±0.05 typical) on
ranges marked * in the table above. Linearization for other
ranges is better than ±0.5°C. BS4937, NBS125 & IEC584.
Supported RTD Types
& Ranges:
Optional decimal place can be displayed up to 999.9°C/F
0.1% of full range, ±1LSD
Linearization better than ±0.2°C (±0.05 typical).
PT100 input to BS1904 & DIN43760 (0.00385Ω/Ω/°C).
Sensor current 150μA ±10%
<0.5% of span error for max 50Ωper lead, balanced
Supported Linear
Types & Ranges:
Scalable from ‐9999 to 10000. Decimal point selectable from 0
to 3 places, but limited to 5 display digits (e.g. 9999.9)
1A on mA input terminals, 30V on voltage input terminals
±0.1% of full range, ±1LSD
DC Input Multi‐Point:
Linearization:
Up to 15 scaling values can be defined anywhere between 0.1
and 100% of input
Table 2. Outputs.
Single pole single throw (SPST); 2A resistive at 120/240VAC
>200,000 operations at rated voltage/current
Kommentare zu diesen Handbüchern